====== GSM Sniffing with RTLSDR ======
===== Installation =====
Use the manual installation as described in the [[https://github.com/ptrkrysik/gr-gsm/wiki/Manual-compilation-and-installation|Wiki]]. The automatic one is strange.
On Gentoo, at least the following packages are required:
* net-libs/libosmocore
* FIXME
git clone https://github.com/ptrkrysik/gr-gsm.git
cd gr-gsm
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig
wget -O /etc/udev/rules.d/rtl-sdr.rules http://git.osmocom.org/rtl-sdr/plain/rtl-sdr.rules
mv ../../gr-gsm /opt
chown -R root.root /opt/gr-gsm
===== Usage =====
==== Scan ====
Scanning the Channels does not work like this :-(:
sudo sysctl kernel.shmmni=32000
for b in P-GSM DCS1800 PCS1900 E-GSM R-GSM GSM450 GSM480 GSM850 ; do
echo $b
PYTHONPATH=/usr/local/lib64/python2.7/site-packages python2 airprobe_rtlsdr_scanner.py -g 30 -b $b -p 0 -v --speed 1
done
Ugly hack (change ARFCN in ''seq'', here it's given for Europe):
for a in `seq 0 124` `seq 955 1023` `seq 512 885` ; do
if [ `PYTHONPATH=/usr/local/lib64/python2.7/site-packages airprobe_rtlsdr_capture.py -a $a -c /dev/null -v -T 1 2>/dev/null | wc -l` -gt 1 ] ; then
echo $a
fi
done
==== Sniff TN0 ====
wireshark -k -Y '!icmp && gsmtap' -i lo
PYTHONPATH=/usr/local/lib64/python2.7/site-packages gnuradio-companion ../apps/airprobe_rtlsdr.grc
===== BTSs =====
[[:int:sdr|List of BTSs]] (Internal)